ClassicFinds

Do not have appropriate permissions to access the item.

4 posts in this topic

Hey all,

First post been reading here for awhile learning on my own to get my little ex470 running.

Everything has been fine the past month until the other day. I had installed uTorrent on my Admin account (I know big NO NO.) I then found the add-in for uTorrent and a guide to create a new Account to use and run programs from there so as not to use Admin.

I created a new account and logged in from Remote Access under my Vista 32-bit system. (All of this has been working fine.)

Now after bringing the rktools.exe and utorrent.exe to my desktop. It gives me: You may not have the appropriate permissions to access the item. I have check both this account and Administrator and they both say the same thing. I from what I can see have full account privileges on both. I made my account and added Administrator Privileges.

I've searched everywhere and still unable to find anything. Somebody's got to know something. Thanks again.

Ed

post-24897-1234112352_thumb.jpg

Share this post


Link to post
Share on other sites

Upgrade to a WGS Supporter Account to remove this ad.

Check to see if Windows has blocked access to the file because it is "unsafe." Right-click the file, choose Properties, and then click the Unblock button.

Share this post


Link to post
Share on other sites
Check to see if Windows has blocked access to the file because it is "unsafe." Right-click the file, choose Properties, and then click the Unblock button.

Awesome....Thanks so much

post-24897-1234125659_thumb.jpg

Share this post


Link to post
Share on other sites

Not sure why you wanted to set up a seperate account... utorrent is just a client app and doesn't launch the files.

Personally, I find it is a lot of extra trouble with little to no gain setting up another account.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now



Upgrade to a WGS Supporter Account to remove this ad.



  • Posts

    • Dave, can you clarify what you mean by this?
    • I had no problem with Windows 10.  However, I just completed the anniversary update and now the "Connector" won't run to conclusion.  It backs itself out and reports an unspecified error.
    • Apologies if I'm being stupid, but I'm having great trouble understanding how Lightsout backup and the Server Essentials 2012 backup work together (or fight with each other). I find the Lightsout documentation on this very unclear, and various threads have left me no wiser. I'd appreciate some help! Here's the setup: Lightsout is running nicely on the server. Before backups were set up, I established that the server hibernated when the clients were switched off. The server woke up when a client was powered up. (This behaviour broke when backups were set up.) The server is Essentials 2012, with a number of client laptops: a mix of Windows 7, 8 & 10. The Essentials backup window is 22:00 - 07:00. No backup settings are currently made in Lightsout. Here's what I'd like to achieve: At the end of the working day all the clients are put to sleep or hibernate (or switched off completely, I don't care which). Ten minutes after that, Lightsout hibernates the server. Sometime during the night (22:00 - 07:00) the server wakes up, then wakes up the various clients in turn, backs them up, and puts them back to sleep / hibernate / shutdown (I don't care which). Here's what actually happens (when I look at the uptime chart the next morning): At the end of the day (about 17:15) the clients are put to sleep / hibernate. (I tell the team not to shut down their client laptops because I assume the server can't wake a completely shut down client - is that correct?) The server does not hibernate. Approximately 90 minutes after the clients were put to sleep / hibernate, they all wake up simultaneously (around 18:45, but I don't know why this happens). The clients then stay awake all night. Later, from 22:00, some of the backups take place (but not all of them). The backups are spread wide apart in the 22:00 - 07:00 window with lots of time when nothing is going on at all. The clients do not go back to sleep / hibernate after their backups. ...can anyone suggest what combination of settings I should be using to get the desired behaviour? Here are the sort of things that are confusing me, but I can't find definitive answers (and each experiment I do takes 24 hours to give any results!): I know I can specify clients' individual backup times in Lightsout, but I don't know how long a client's backup will take, so I could have backups overlapping each other and causing a traffic jam. Should I worry about this? If I set Lightsout backups, what do I set for the Essentails backup window? What if it's not long enough to get all the backups done? If I make settings in the Lightsout backup dialog do I have to complete everything in that dialog box? Does this make the Essentials 2012 backup settings redundant? What about the Essentials 22:00 - 07:00 backup window, does that matter any more? I tried setting client backup times in Lightsout with an end action of 'sleep'. The backups didn't happen at all and clients all spontaneously went to sleep in the middle of the working day (the server / clients clocks all match, I checked). Can Lightsout wake up a client laptop that is completely shut down? Thanks for reading this long post and sorry if these seem like stupid questions. I already have WHS2011 / Lightsout running perfectly on another setup (where my backups take place during the day), but nocturnal backups are a new level of complexity for me!
    • Christopher wrote:  << And to clarify, if you want multiple backup drives to be cycled offsite, you MUST connect all of them at the same time when you set up the backups. >> I'm not clear about this. To the best of my recollection, I never connected both of my backup drives to the server at the same time,  For test purposes, I just initiated a recovery (using the WHS Installation Disk) with each of them hooked up.  The one that has been offsite and the one that backed up last night were both found by the "Repair an existing installation" procedure.  Perhaps I'm misreading your clarification.
    • Please check if task scheduler is still working. If not use this tool here https://repairtasks.codeplex.com/ If that does not help you may try to reinstall WHS Connector.
  • Popular Contributors