So here is what I have done
1. Installed Grid Junction
2. Shut down, hooked up UPS via serial to serial cable
3. Started up, Grid Junction does not see UPS
4. Installed CyberPower Power Panel, it detects UPS just fine
5. Uninstalled CyberPower, still no-go on Grid Junction
6. Looked in Device Manager, there is no "battery" devices
7. Tried to manually add, but I can't find the category or any drivers by CyberPower, APC, or a generic HID UPS.
What should I do?
Welcome to We Got Served Forums
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Can't get Grid Junction to work
Started by
Vanilla Xtract
, Jul 21 2009 04:16 AM
Back to top
#2
Posted 21 July 2009 - 06:02 AM
Dave Marchant (WGS)
-
- Moderators
-
- 3,664 posts
Advanced Member
- Gender:Male
- Location:High Wycombe, UK
GridJunction hasn't got serial signaling support as far as I am aware as it is generally too proprietary. It pretty much depends on USB connectivity.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
Community Forum Software by IP.Board
Licensed to: Terry Walsh, We Got Served.
